Parturient ut id tellus vulputatre ac ultrlices a part ouriesnt sapien dignissim partu rient a a inter drum vehicula. Ornare metus laoreet tincidunt eros rolem tristique pretium malada.
Cras rhoncus vivamus luctus platea arcu laoreet selm. Curae est condenectus sed hac a parturient vestibulum.
The HPB motor is the latest innovation in the Staffa range. With increased speed and power ratings compared to our standard HMB motor, it can increase productivity whilst providing the reliability you would expect from a Staffa motor. The new Staffa HPB motor is the perfect fixed displacement motor for industrial applications.
The fixed displacement HMB series radial piston motors have a well proven design that incorporates high efficiency with good breakout torque and smooth running capability.
The HMC series variable displacement models have two pre-set displacements which can be chosen
from a wide range to suit specific application requirements. These motors are also available in a
continuously variable version using either hydro-mechanical or electro-hydraulic control methods.
The HMF three-speed models have three pre-set displacements which can be chosen from a wide range to suit specific application requirements. Motor displacement can be changed with ease while the motor is running.
The enhanced variable displacement HPC models include special low friction components, combined with crankcase flushing flow, to achieve increased shaft power. It is used around the world in marine and offshore winch applications and is known for its efficiency and reliability.
The K3V/K5V/K7V pump range has been specifically designed to meet the demands of hydraulic excavators and other mobile machinery. The introduction of the K7V offers a step change in hydraulic pump efficiency.
The K3VG series are swash-plate type axial piston pumps which give excellent performance in high flow industrial applications in a compact and cost-effective package.
The K3VL series swash plate type axial piston pumps are designed to satisfy a variety of construction and off-highway applications where a medium to high pressure variable displacement pump is required.
Kawasaki’s new medium duty pump, the K3VLS, has been developed for machines and equipment that use a load sensing control system and/or electric displacement control systems. Its launch follows extensive research and development as our engineers combined efficiency with simplicity to deliver the most technologically advanced pump on the market.
The K7VG series of high-pressure swash plate type pumps was developed for general industrial machinery use. The adoption of the high-load bearings and friction-free contacting mechanism of piston shoes, results in a high level of reliability and long life.
The K8V series is Kawasaki’s new closed loop pump with excellent controllability and superior efficiency. It is used in hydrostatic transmissions ona variety of off-highway machinery.
The KDRDE5K and KWE5K series valves are proportional pressure-reducing and directional control valves of cartridge type. Available in 12 and 24 VDC versions, they can be used in combination to provide various compact control solutions for agricultural and mobile machinery.
The KLSV is a series of flow-sharing, load-sensing main control valves for multifunction construction machinery. Their low hysteresis and excellent pressure drop characteristics provide superior performance and efficiency.
The KLW is a flow-sharing, load-sensing main control valve specifically designed for wheel loaders. Their low hysteresis and excellent pressure drop characteristics provide superior performance and efficiency.
The KMP series main control valves provide proportional control of agricultural and mobile machinery. They give precise control with pressure compensation and the internal pilot system eliminates the need for external pilot pressure sources.
The KMX series consists of three sizes of main control valve designed specifically for the control of hydraulic excavators. Their semi-monoblock construction provides a very compact installation for main and pilot circuits. The KMX gives excellent controllability and superior system efficiency.
The KPES6 is a compact valve for levelling control of attachments on agricultural vehicles. It provides priority flow supply to A and b ports (for levelling) and pressure compensation for A, B and N ports (for hitch control).
This proportional control valve has been designed to provide precise control of the hydraulic hitch on agricultural tractors. The KTEM8 provides meter in and meter out control in porportion to the input currents to the solenoids irrespective of the working pressure.
The M3X and M3B series are swash plate type axial piston motors in fixed (M3X) and variable (M3B) displacement versions. They are used extensively in mobile crusher drives, cranes and drill rigs.
The M5X series is an extremely compact fixed displacement swash plate type axial piston motor with built-in parking brake designed for the swing function of excavators, cranes and other construction machinery.
The M7V series is a high speed variable displacement swash plate type axial piston motor. It is suitable for use in hydrostatic transmissions, drill rigs and crane winch systems.
Kawasaki’s range of pilot controllers offer unparalleled controllability and superior operator feel. Available for hydraulics pilot control in the PV range, or electronics control in the ERU range they are suitable for a wide variety of industrial vehicles.
No account yet?
Create an Account
