Load Control Valves CINDY
Description
Whenever loads are to be precisely moved, placed and held, leak-free load-control valves from the CINDY series are the right solution. Load-control valves in this series prevent hydraulic actuators from running ahead of the available oil supply. In one valve, they combine the functions of load-holding, safety and pipe rupture protection. Leak-free load-control valves in this series are ideally suited for use in high-pressure applications up to 420 bar (6000 psi). With a variety of optional components, the series can be extended and adapted to the requirements of the system.
Load Control Valves CINDY-REG
Description
With the CINDY-REG load-control valve, we offer the perfect solution for saving energy right at the cylinder. The safety valve with the smart regeneration concept makes it possible to reuse a part of the oil flow, which is fed directly into the opposite end of the cylinder. During lowering operations on mobile machines the pump output flow can be significantly reduced, which is important for saving energy.
Pipe Rupture Valve RS
Description
Excavator pipe rupture valves prevent uncontrolled cylinder movement in the event that a pipe or hose bursts. The ESV valve fulfills all of the requirements of the ISO 8643 and EN 474-5 standards for excavators.
Shuttle Valves, Size 04…10
Description
Ball-type, screw-in design
Series WRVCG
The valve shuts off whichever one of the two inlet ports A and B is at the lower pressure. Port C is therefore connected with whichever one is at the higher pressure.
Shuttle Valves, Size 2
Description
Ball-type, screw-in design
Series RWA…
The valve shuts off whichever one of the two inlet ports A1 and A2 is at the lower pressure. Port A is therefore connected with whichever one is at the higher pressure.
Shuttle Valves, Size 2
Description
Ball-type, screw-in design
Series RWZ…
The valve shuts off whichever one of the two inlet ports A1 and A2 is at the lower pressure. Port A is therefore connected with whichever one is at the higher pressure.
Stack-mounting Valves
Description
Seat valve design, series SRV / SRVA
Check valves prevent any flow in one direction. In the opposite direction, free flow with minimal pressure drop is possible.
Stack-mounting valves with ISO / DIN / NFPA / ANSI interface.