Stack-mounting Valves
Description
Seat valve design, series SRV / SRVA
Check valves prevent any flow in one direction. In the opposite direction, free flow with minimal pressure drop is possible.
Stack-mounting valves with ISO / DIN / NFPA / ANSI interface.
T-DSG Electronic Relay Incorporated
Electronic Relay Incorporated Solenoid Operated Directional Valves
Drive power source and signal are separate.
The valve is actuated by operating a built-in switch using a very small current signal (about 10 mA) when the solenoid is energized.
A Direct Drive by a programmable controller is now possible.
As the valve can be actuated by a very small current, as we have mentioned, a Direct Drive is possible on the output circuit of the programmable controller or sequence controller.
Simple construction and stable operation.
Since the valve is a direct type, the construction is quite simple. Also the solenoid is the well proven wet armature type, which can withstand contamination. Therefore a stable operation can be obtained.
Throttle Modules
Used as pilot choke valves for solenoid controlled pilot operated directional valves and pilot operated directional valves.
Tipper Trailer Power Units 1
General Description
This power unit is designed exclusively for small tipper, consisting of high pressure gear pump, DC motor, multi-functional manifold, valves and tank, etc. The hand pump with a displacement of 8cc per stroke works as a backup power souce of lifiting the tipper in case of power failure with the lowering movement is activated by the solenoid valve.
