Pressure Reducing/Pressure Reducing & Check (RT RG RCT RCG)
Pressure reducing valves are used to set the pressure of a hydraulic circuit below that of the main circuit. In addition, operation under remote control is possible by using the remote control port. Pressure reducing and check valves have check valves, which allow a free flow from the secondary side to the primary.
Priority Valve
Description
Priority valves are used to provide a hydraulic function in a load sensing system with a priority flow.In principle, they operate like a 3-way flow control valve that always supplies the actuator that has priority with the required flow rate, and passes the remaining flow to other actuators. In an under-supply situation, the actuators without priority are no longer supplied.
Proportional Directional Valves CV
Description
This range of proportional valves is used to provide load-independent speed control of motors and cylinders.
CV (Compac) means: all valves functions are integrated into one compact block.
Proportional Directional Valves MV
Description
This range of proportional valves is used to provide load-independent speed control of motors and cylinders.
Proportional Directional Valves, Series L.8S
Description
The L.8S valve series covers an actuator flow rate of up to 90 l/min and was developed for mobile applications. The valves are particularly characterized by their robust design and small external dimensions, and they offer a wide variety of additional functions that can be integrated. The L.8S is a flexible modular system whose elements can be combined to form a valve block that complies fully with the requirements of the application. The valve blocks can be configured for fixed-displacement or load-sensing pump systems as well as for systems that can switch between either type of supply.
Proportional Directional Valves, Series LCV
Description
Series LCV proportional directional control valves have been developed for use in tractors and similar applications. The high level of integrated functionality combined with the ability to parametrize the valve characteristics provide the basis for enhanced system solutions. The outstanding dynamics and stiffness of the valve’s stepper-motor operation ensure first-rate control of the actuators. Flexibility within the sections themselves, and supplementary functions in bolt-on plates, open the door to optimized solutions. The fully automated high-volume production guarantees extremely high quality at very attractive terms. Achieve maximum productivity with reduced energy consumption.
Proportional Directional Valves, Series LVS08 / LVS12
Description
The design uses the concept of pressure compensators integrated in the control spool to achieve very low pressure loss. This feature, together with the downstream system for flexible parallel actuation and the high degree of modularity, makes this proportional directional valve suitable for very adaptable application in mobile machines. The additional functions that can be incorporated, the high power density combined with high actuator flow rates of up to 180 L/min and the possibility of combining two different valve sizes in one control block round off the LVS08 / LVS12 proportional directional valves. They make up a flexible and compact modular valve system.
The valve blocks can be configured for fixed-displacement or load-sensing pump systems.
Proportional Directional Valves, Series LVS18
Description
This range of proportional valves is used to provide load-independent speed control of motors and cylinders. The LVS18 is operating according to the flow sharing principle. Also available with rapid-traverse and floading function.
Proportional Directional Valves, Series SC12 / SC18 / SC22
Description
This range of proportional valves is used to provide load-independent speed control of motors and cylinders.
Proportional Directional Valves, Series SV12 / SV18 and SV25
Description
This range of proportional valves is used to provide load-independent speed control of motors and cylinders.
